Mccb

  • JVM1R/E Moulded Case Circuit Breaker

    JVM1R/E Moulded Case Circuit Breaker

    JNM1R/E  Series Intelligence moulded case circuit breaker is one of products developed and manufactured by adopting international advanced technology. It is supplied with rated insulating voltage 800V and used for circuit of A.C.50Hz, rated operating voltage AC 400V(or below ), rated operating current up to 800A for infrequent changing over and starting of the motors. The products con-forms to IEC 60947-2 stamdard.

  • 3VL-250 250A Electrical Molded Case Circuit Breaker MCCB

    3VL-250 250A Electrical Molded Case Circuit Breaker MCCB

    To Supply JVM6-250 3VL-250 250A Electrical Moulded Case Circuit Breaker  100A~250A

    Application

    JVM6 3VL series Molded Case Circuit Breaker features reliable quality, steady performance, reasonable structure, beautiful appearance and small volume. It can be used in the circuitof 50Hz or 60Hz and rated voltage up to 600V. It is used to distribute electric energy in distribution network, overload or short circuit protection power equipmentand transformation of infrequent circuit under the normal conditions.

    Characteristic

    * Compact design, excellent technical features, easy to operate.

    * Suitable for up to 70 ° C .

    * Thermomagnetic type(16A~630A); Electronic type(63A~1600A).

  • JVM1LE(CM1LE) Moulded Case Circuit Breaker

    JVM1LE(CM1LE) Moulded Case Circuit Breaker

    Application

    JVM1LE series moulded case circuit breaker with residual current production. Rated insulation voltage is 800V. It applies to circuit of AC 50Hz, rated working voltage 400V and rated working current up to 630V,for in frequent switch over and infrequent start of motor. With overload, Short circuit and under-voltage production, itcan protect circuits and power-supply equipment from damage, can also be used for production from damage andany potential fire hazard caused by long existing earth fault which can not be detected by over-current production.The value of residual current is selectable.

  • Load isolation switch

    Load isolation switch

    Product description

    Modular design structure, flexible and diverse combination, using glass fiber reinforced unsaturated polyester resin to make the shell, with high dielectric performance, protection ability and reliable operation safety.

    The operating mechanism is an accelerating mechanism with spring energy storage and instantaneous release, which instantaneously connects and breaks the double-breakpoint contact structure. It has nothing to do with the speed of the operating handle, which greatly improves the electrical and mechanical properties.

    A variety of structures and operation methods, there are windows for directly observing the on-off state of the contacts, operations inside and outside the cabinet, front and side operations, and back-to-board wiring.

  • 3p 4p 16~1250A Adjustable MCCB/moulded case circuit breaker

    3p 4p 16~1250A Adjustable MCCB/moulded case circuit breaker

     

     

    We are a large scale manufacturer of low voltage electric appliance, cable accessory, electric accessory.

     

    JVM2 Breaker are suitable in AC 50Hz, 250/440V circuit with overload and earth leakage protection. The rated current is adjustable from 25A up to 1600A. User can select suitable current to better protection against overload and short circuit. The products comply with NFC 61450.

    Rated insuiating voltage : 750v

    Rated operating voltage : 690 and below

    Ultimate short breaking capacity : 25KA~150KA

    Servies short circuit breaking capacity : 25KA~150KA

     

     

  • JVM 5 (EZC) type case circuit breaker

    JVM 5 (EZC) type case circuit breaker

     

    Application

     

    JVM5MCCB is a simple and unlimited solution that can meet all low-voltage protection needs.

    The circuit breaker has a compact structure and reliable quality, which greatly improves the high segmentation capability. It can be seen from the design that the riveting material in the operating mechanism must be matched according to the actual product in the design; each part must not only have a precise calculation of the size, but also consider the mutual cooperation between them, in order to make the assembled whole Meet the calibration standards. It can be understood from the calibration analysis that the instantaneous action characteristics in the electromagnetic system are closely related to the operating mechanism. After the calibration parameter values are obtained through theoretical research, strict test verification is required to meet the product standards; the extension of the calibration electric heating system The time trip value also needs to be obtained based on the combination of the calculated value and the actual value.

  • To supply C65N DPN IPDNA DOMA DZ47 1P 2P 3P 4P 3–60A high quality mcb breaker

    To supply C65N DPN IPDNA DOMA DZ47 1P 2P 3P 4P 3–60A high quality mcb breaker

    XL7-63 Solar system DC MCB,apply to rating current 63A or less, It is mainly used for the overloading and short circuit protection in DC distribution system equipment and electric equipment. It can be widely used in electric, post, traffic, mining enterprise and different kinds of fields.

  • Isolating switch

    Isolating switch

    The function of the fuse is to protect the current. The fuse is composed of a melt and a fuse tube, which are connected in series as a metal conductor in the circuit. When the current exceeds a certain value, the fuse will generate heat to melt the melt, thereby breaking the current and achieving the protection effect. Fuses are widely used in various electrical and electrical equipment due to their simple structure and convenient use.

  • JVM1LE(CM1LE) Moulded Case Circuit Breaker

    JVM1LE(CM1LE) Moulded Case Circuit Breaker

    VM1LE(CM1LE) Moulded Case Circuit Breaker

    JVM1LE series moulded case circuit breaker with residual current production. Rated insulation

    voltage is 800V. It applies to circuit of AC 50Hz, rated working voltage 400V and rated working current up to 630V, for in frequent switch over and infrequent start of motor. With overload, Short circuit and under-voltage production, it can protect circuits and power-supply equipment from damage, can also be used for production from damage and any potential fire hazard caused by long existing earth fault which can not be detected by over-current production. The value of residual current is selectable.

  • JVA5 AEG(E93)1P/2P/3P

    JVA5 AEG(E93)1P/2P/3P

    Application

    JVA5 Series has high sensitive short circuit and overload protection functions, and is suitable for power distribution systems in factories, businesses and residential buildings, and protects matching power equipment. The utility model has the advantages of strong breaking ability, large capacity, high sensitivity, good reliability, long service life, convenient replacement, etc. Mainly suitable for AC 50/60Hz, single-phase 230V, in three-phase or four-wire 440V circuit in overload and short-circuit protection. At the same time, they are also used for switching switches under normal conditions. The product is designed and manufactured according to IEC 60898 and IEC 60947 standards.